Commercial · Palm Coast, FL
Protect doors, storefronts, loading areas, and equipment with properly set bollard posts from Frontier Fences Palm Coast, serving since 2017. We install new posts and repair bent, loose, or rusted bollards using proven concrete footings and durable finishes, with Palm Coast scheduling that stays on track.
Every solid bollard starts below grade. We locate utilities (call 811), confirm the layout for vehicle approach angles, then core-drill through concrete slabs or excavate in soil for the correct footing diameter and depth. For most sites we set Schedule 40 or Schedule 80 steel pipe plumb, add rebar where needed, and pour concrete with proper consolidation so the post does not wobble or rotate. When an existing bollard fails, we remove the damaged pipe, break out the old footing as required, and rebuild the base instead of patching around movement.
Palm Coast conditions mean we plan for sandy soils, drainage, and corrosion. We use concrete mixes suited for exterior exposure, keep the top of the footing shaped to shed water, and seal around core-drilled penetrations to reduce moisture intrusion. Finish options include safety-yellow paint, marine-grade coatings, or powder-coated sleeves, plus reflective tape or caps for visibility around parking and drive lanes. If your property needs compliant protection, we can coordinate spacing, setbacks, and heights to match site plans and common commercial requirements (often 36-42 inches above grade).
Customers choose us because we treat bollard posts like impact-rated protection, not decorative pipe. You get a licensed and insured crew that shows up with the right equipment, including rotary hammers, core drills, levels, and concrete tools, so installs stay clean and accurate. We communicate clearly with property managers and business owners, keep access and pedestrian paths in mind, and work around store hours when possible. Our goal is a straight, uniform row of bollards that looks professional and takes the hit when a bumper or forklift drifts off line.
Before we wrap up, we walk the site with you to confirm alignment, spacing, and clearances at doors, curbs, and equipment pads. You receive a written estimate up front, a clear scope of work (new install or repair), and a practical plan for cure time, paint schedules, and reopening the area. We also flag any related issues we see, like cracked slabs, poor drainage, or damaged wheel stops, so you can fix the cause and not just the symptom. If a post needs future service, you will know exactly what was installed and how it was set.
Bollard Post Installation & Repair in Palm Coast, FL
intro
highlights
body
Yes. We provide a free written estimate after an on-site measure and a quick review of layout, materials, and gate needs.
Often, yes. We can replace broken panels or pickets, reset leaning posts, adjust gates, and upgrade hinges and latches when the main structure is still sound.
Common installs include vinyl privacy and picket, wood privacy and shadowbox styles, ornamental aluminum, and chain link for residential or commercial sites.
Timing depends on linear footage, material, terrain, and gate count. After we measure, we provide a schedule estimate with your written quote.
Yes. We build walk gates and larger openings such as double-drive gates, sized for vehicles, trailers, and lawn equipment, with hardware selected for smooth operation.
Bollard posts are one of the simplest ways to protect people, buildings, and equipment from low-speed vehicle impacts. Frontier Fences Palm Coast installs and repairs steel bollards for storefronts, walkways, roll-up doors, fuel stations, drive lanes, and equipment pads. Whether you need a single replacement after an accident or a full line of protective posts, we focus on the parts that matter most: a stable footing, plumb placement, corrosion resistance, and a finish that stays visible.
A typical bollard post install starts with layout and verification of clearances at doors, sidewalks, and parking stalls. We confirm utility locations, then excavate or core-drill to create the correct hole size for the pipe and footing. Posts are set straight using levels and bracing, then we pour concrete and consolidate it so the post does not shift over time. For higher-abuse areas, we can discuss thicker wall pipe, deeper footings, or protective sleeves depending on how the area is used.
For repairs, we diagnose why the bollard failed before replacing it. Some posts loosen because the concrete collar cracked, the pipe rusted at the base, or a shallow footing was installed originally. We can remove damaged sections, break out compromised concrete, and rebuild the base so the replacement is not a temporary fix. If the surrounding slab is chipped from impact, we can recommend the right sequencing so patching, sealing, and repainting happen in the proper order.
You will get a straightforward written estimate, a defined install plan, and a final walkthrough to verify spacing, alignment, and finish. If you are coordinating with a property manager, contractor, or tenant, we can communicate access needs, cure time, and any temporary barricading required to keep the area safe while concrete and coatings set. When bollard posts are installed correctly, they reduce damage, downtime, and liability with a clean, professional look.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Palm Coast. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
