Residential · Palm Coast, FL
A wrought iron fence should look sharp, swing true, and stay rigid for years. Frontier Fences Palm Coast has served Palm Coast since 2017, handling new wrought iron fence installation, section repairs, and gate work with clean layout, solid footings, and corrosion-resistant hardware.
Every long-lasting wrought iron fence starts with layout and a stable base. We confirm property lines and setbacks, mark post locations, and keep runs straight with stringline, laser levels, and measured spacing so panels land square on centers. Posts are set plumb in concrete footings sized for height and exposure, typically 10-12 inches diameter and 24-36 inches deep where soil conditions allow. On sloped lots, we step panels to follow grade, maintain consistent picket height, and prevent gaps that invite pets out or debris in.
Coastal Florida air, salt, and frequent rain can attack bare steel fast, so finish matters as much as structure. We install galvanized or zinc-primed components when available, and for repairs we remove loose rust, address pitting, and prep surfaces for bonding primer and a UV-stable topcoat. Hinges, latches, and fasteners are selected to resist corrosion, including stainless steel or hot-dip galvanized hardware, and we tune gates for smooth swing and reliable latch engagement. If you are upgrading security, we can add spear-top pickets, tighter spacing, or reinforced gate frames without making the fence look bulky.
Palm Coast customers choose us because we treat wrought iron as precision work, not generic fencing. You get clear recommendations on panel style, post size, weld quality, and what is worth repairing versus replacing, backed by a written estimate. Our crews show up with the right equipment for accurate results, including core drills when needed for existing concrete, rotary hammers, and proper bracing for gate alignment. We keep the jobsite organized, protect nearby landscaping, and communicate scheduling so you are not left guessing.
Before we call the job complete, we walk the line with you and check the details that affect daily use. We verify post caps, weld points, fastener tightness, gate alignment, latch operation, and consistent reveal at the bottom of pickets, then clean up metal filings and construction debris. You receive your scope of work, material specs, and basic care guidance, including washing and touch-up recommendations to slow corrosion. If we repaired an existing wrought iron fence, we point out the original failure points and how the fix prevents the same sag, rattle, or rust from returning.
Yes. We provide a free written estimate after an on-site measure and a quick review of layout, materials, and gate needs.
Often, yes. We can replace broken panels or pickets, reset leaning posts, adjust gates, and upgrade hinges and latches when the main structure is still sound.
Common installs include vinyl privacy and picket, wood privacy and shadowbox styles, ornamental aluminum, and chain link for residential or commercial sites.
Timing depends on linear footage, material, terrain, and gate count. After we measure, we provide a schedule estimate with your written quote.
Yes. We build walk gates and larger openings such as double-drive gates, sized for vehicles, trailers, and lawn equipment, with hardware selected for smooth operation.
A wrought iron fence adds security and curb appeal, but it only performs well when posts are set correctly, panels are aligned, and the metal is protected from corrosion. Frontier Fences Palm Coast installs new iron-style fencing and restores existing sections with straight layout, properly sized concrete footings, and hardware that stands up to Florida weather. Whether you need a new perimeter fence, a driveway gate, or a repair after impact damage, we focus on fit, finish, and long-term rigidity.
Wrought iron fence projects often fail at predictable points: shallow footings that let posts lean, undersized gate frames that sag, and coatings that chip and allow rust to spread. Our process starts with a straight, measured layout and consistent spacing, then we set posts plumb and brace them while concrete cures. For gates, we reinforce frames as needed, use heavy-duty hinges, and adjust swing and latch alignment so you are not fighting a dragging gate or a latch that pops open.
For wrought iron fence repair, we match existing panel profiles when possible and correct the root cause, not just the symptom. That can include replacing a loose post, resetting a section that has shifted, tightening hardware, or welding and grinding clean before repaint prep. When repainting is part of the scope, we prep the metal properly so primer and topcoat adhere, helping slow future rusting in humid, salt-influenced air.
If you are planning a new install or want a quote to restore an older fence, we will walk the property, review access points, confirm gate needs, and provide a clear written estimate. You will know what is being replaced, what is being repaired, and what finish and hardware options best fit your goals for security, appearance, and maintenance.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Palm Coast. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
